• Acrylic concrete-polymer based coating.
• Provides a seamless finish- No joints to fall.
• Elastomeric-Easily copes with thermal movement within roof.

Roofsealer is an acrylic concrete- polymer, elastomeric membrane for coating all types of roof with a pitch of more than 5^o. It is applied in two coats and provides a seamless, waterproof finish. Do not use on flat 'Ponded' surfaces.

Do not thin Roofsealer. Apply in two coats straight from the container using a brush, or spray at a coverage of 2 sq. m./lit. per coat and across brush to avoid any pinholes occurring. Allow 4-8 hours between coats for cure. Apply the second coat at cross angles to the first coat. Roofsealer should not be applied at surface temperatures of less than 5^oCel, or below the dew point, which ever is greater, or when there is a risk of rain or frost.

Coverage                        : 2 sq. m /lit. per coat (2 coats required)
Re- Coat interval             : 4-8 hours dependant on temperature and relative humidity. Elongation                      : 450%  
Specific Gravity               : 1.35 g/cc
Solids                            : 65%
Shelf Life                        : 12 months( unopened)
Flash Point                     : Non-flammable
Application Temperature   : 5^oCel. Minimum-45^oCel. Maximum.
Water vapour permeability : 16.7 g m² day ¹ (@ 25^ocel./75^o RH)
Tensile Strength               : 1.56N mm²
Storage                           : Do not store at temperature below 5^oCel.
Cleaning                          : Cold water, the addition of a detergent will assist.