| Profile l | Location l | Inquiry form l | HOME l |
 |
Back |
CHEMICAL RELEASE AGENT
| DESCRIPTION |
Marlease is a light brown coloured liquid, supplied ready for use- no thinning is required.
| PROPERTIES |
1. Marlease is
a viscosity, easily sprayable liquid or brush applied or with cotton waste.
2. Marlease is a suitable for application onto steel or wooden forms.
3. Marlease is NON-STAINING and is suitable for use with white cement.
4. Marlease prevents rust forming on steel forms and can also be used
to protect concreting plant after use.
5. Marlease helps to reduce the cleaning time for formwork and concrete
plant.
6. Marlease extends the life of the formwork due to the reduction of mechanical
cleaning required.
7. Allows air which would normally be trapped at the inter-face of the
concrete and formwork to escape during vibration and reduces the indidence
of blow holes in the concrete face. This reduces the surface imperfections
and also the need for remedial surface treatment at a later stage.
| How Cementone Marlease works? |
Cementone Marlease
reacts chemically with cement in such a manner that excellent release
properties are imported to the face of shuttering plates, concrete thus
cast using Marlease has a smooth, hard & uniform finish. Marlease does
not affect concrete in any harmful manner.
The adhesive of subsequent surface coatings or renders is not affected
by concrete treated with Marlease.
| PRODUCT DATA |
Sp. Gravity
- 0.70to 0.80
Physical appearance - Pale straw coloured
liquid
Chloride content -
Nil
Nitrate content -
Nil
Flash point -
41 deg.
Sorage -
Indefinite in sealed containers.
| APPLICATION |
On new formwork no preperation is required. On used formwork preparation as follows: (a)STEEL AND PLASTIC FORMWORK, All rust, grease and cement paste should be removed before application of Marlease.
(b.) WOODEN FORMWORK All adhering cement paste should be removed and the surface scraped to remove any old mould oil that may be present.